Archive for the ‘Render Products / Concrete Products / Glues / Grouts’ Category

Attached Carport by Extreme How-To. For the designs to this carport see the list of carport designs below.

So we have gone through the initial questions of design and you should now have spoken to the council and be ready to prepare formal plans if required.  But before we get down to choosing a plan in order for you to build the carport yourself, lets recap on our checklist.

Checklist:

  1. Decide your preference for a freestanding or connected carport
  2. Have a decent picture in your mind about how you want your carport to look, how high it will be and how long, is it single or double, etc.
  3. Measure and confirm where it will go and that it fits.  Also measure the distances to the nearest boundaries or other structures.
  4. Talk to your neighbours and get their confirmation that they do not mind your new structure.
  5. Speak to your council and get information including any restrictions with your building and what you need to supply to the council if you  do need to apply for council approval.
  6. Select your design and modify it to suit your look.
  7. Choose your materials ensuring these are in line with council requirements.  Go for durable material that suits the environment you live in.
  8. Draw up your plans showing both the design and measurements and note on the plans your materials.  Your diagrams will need to be quite detailed.
  9. Apply for approval.
  10. Invite your mates over and have a ‘build a carport’ weekend!

In Building a Carport Part 1 we looked at items 1-3 on the checklist above and in Building a Carport Part 2 we reviewed 4 and 5.  Now we will look at the remaining points.

Choosing a design

So you know roughly how you want your carport to look, so now it is just a matter of finding a design to match.  We have scoured the internet and bring you some of the best designs around:

  • How to build a wood-free carport – this carport is described by eHow as moderately easy to build but lacks pictures and diagrams to assist.
  • Free standing carport plans and construction details – I really like these plans from BuildEazy as they go into much more detail and include images of what you need to do.  You will find this is a single carport with only a slight sloping roof.  Be aware that some councils will require more of a slope.  Note that this carport design comes in imperial and metric versions.
  • Two car garage with either a frame or post construction – These are great detailed plans of a two car garage.  You will find them on this site under number 5929 and 5930.  It would be quite easy to adapt these plans to your own carport because they are so well done.
  • A shade cloth carport – A different idea altogether from DIY Site these are plans for how to construct a carport using shade cloth.
  • Attached Carport – This design from Extreme How-To shows with plenty of instruction, diagrams and photos how to build an attached carport.

Shade cloth carport from the DIY Site. For instructions on how to build this carport, see the link above.

Choosing your materials

Most of these designs clearly list the materials that you will need in order to make the carport.  The next step is to choose what timber and what screws you should use.  If you are not used to building such structures it may be worth talking to your local hardware store.  Seek out the appropriate expert to guide you as to what you need to consider when purchasing, but some of the items you might want to consider are whether there are issues with termites, longevity of the material (weather resistant such as treated wood and galvanised steel).  Check out the DIY Bargain Bin for all your requirements as you can save a lot of money buying from one of our suppliers than purchasing direct from another timber supplier.

Draw up your plans

It is now time to draw up your formal plans. Remember at this stage you should already be fairly comfortable with what the council will and will not allow.  If you are not able to draw up the plans to the level of detail you may wish to hire an expert to do these for you.  An example of how your plans must look is shown in the image below which was taken from Whitehorse Council’s (VIC) website.

Sample plans for a carport sourced from Whitehorse Council's website.

Check with your council on the exact information they want to see and what scale the diagrams should be.

You are now ready to apply for approval.  Once received you are ready to go ahead with construction of your carport.


Photo courtesy of Hipengr

Sometimes you will want to improve the look of a room without spending a huge amount of money or calling in a dozen tradesmen.  One great way to give a tiled room a new lease of life is to re-grout your tiles.  Grout overtime can discolour, become crumbly or disappear up the vacuum leaving you with holes or low patches.  All of these things take away from the appearance of the room, but grouting is something that is very simple to do yourself and will make a noticeable difference to the look and feel of your room.

Remove the old grout

Start by removing the old grout from between the tiles.  Use a utility knife or grout saw.  Go very slowly to ensure that you do not scratch or damage the surface of the tile.  When you finish give the entire area a good vacuum to ensure that all dirt and remnants of grout have been removed.

New grout

There are two options for your new grout colour, the first is to try and match the colour that you had previously.  This is especially important if you are only doing a small area.  Ask the assistant and check how the grout dries as some will dry lighter.  If you are going for a new colour, then it is easier, but remember to consider the colours of everything in the room.  Standard grout comes in white, grey or brown, but you can get grout now in a range of different colours.

Follow the mixing instructions on the container and apply the grout between each of the tiles being careful not to dislodge the tile from its position.  When you are finished, you will need to allow the grout to dry.  Remove any excess grout from the tiles with a cloth or sponge, ensuring that your grout looks even and neat.  It is much easier to remove excess grout prior to it setting than after.

Finally you will need to seal the floor with a solvent or water-based grout sealer.  Use a grout float to ensure that the sealant is spread evenly across all joins.  Use a damp cloth to then wipe clean each and every tile before the sealant dries.

Your tiles should now have a new lease on life and your room will hopefully look fabulous again.

Find all your grout and sealant products in the DIY Bargain Bin Render Products, Concrete products, Glues and Grouts section.